What reason does the press brake not start

The reasons why the press brake cannot start may be as follows:

  1. Power supply problem: Check whether the power supply is powered on and whether the power supply is normal.
  1. Motor cable problem: The motor cable may be open or short-circuited, causing the press brake motor to fail to start normally. Please check if the motor cable is well connected to the motor.
  1. Overload protection: If the press brake motor is overloaded or the motor fails, the overload protection will be activated, causing the motor to fail to start. Please check whether the motor is overloaded or malfunctioning.
  1. Improper operation: Improper operation of the press brake may also cause the press brake to fail to start, such as not following the correct procedures to start and operate the press brake, or accidentally touching the protection device on the control panel, etc. It is necessary to re-read the instruction manual and follow the correct procedures to operate the press brake.
  1. Equipment failure: Equipment failure is also one of the common reasons why the press brake cannot be started, such as switch damage, motor failure, etc. If power and operation problems have been eliminated, equipment failure needs to be diagnosed and repaired.
  1. Failure to perform maintenance for a long time: If the press brake has not been maintained for a long time, it may also result in failure to start. For example, excessive dust inside the equipment, rusty machine parts, etc. These problems may cause damage to electronic components or motor damage. Therefore, equipment maintenance is very important and requires regular maintenance according to the maintenance manual.

To solve the problem that the press brake cannot start, it is first necessary to conduct a series of systematic inspections and tests, and gradually eliminate possible causes according to the principle from simple to complex. When necessary, professional technicians should be sought for diagnosis and repair.

press brake

We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our Privacy Policy .