What to do if you encounter a press brake mold failure

Press brake mold failure is a common production problem. When encountering this situation, the following measures should be taken to deal with it:

First of all, when a fault is found in the press brake mold, the equipment should be stopped immediately to ensure the safety of the operator. Then, conduct a detailed analysis of the fault situation to find out the cause. Common reasons include: mold wear, breakage, deformation, poor positioning, etc.

For wear problems, you can repair or replace the worn parts; if the mold breaks, the broken part needs to be replaced in time; for deformation and poor positioning, the position of the mold should be adjusted to ensure that it accurately matches the press brake.

During the troubleshooting process, it is also necessary to check whether the mold is installed correctly and whether the gap between the upper and lower molds is reasonable. Reasonable clearance helps improve the bending effect and reduce mold wear.

In addition, regular maintenance and repair of press brake molds is also the key to preventing failures. Maintenance includes cleaning the mold surface, applying lubricant, checking whether the mold screws are loose, etc.

In short, when encountering a press brake mold failure, timely shutdown, analysis of the cause, and taking corresponding measures, combined with regular maintenance and operator training, will help ensure the normal operation of the equipment.

press brake mold failure

We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our Privacy Policy .